VFD Modular Clock Troubleshooting
Most problems encountered while putting together the vfd clock can be traced back to bad soldering connections.
5V is unstable
- Check the solder points, and reinforce any point that looks doubtful.
- Double check the orientation of the diodes is correct.
Ptc fuse gets warm
This is an indication that there might be a short somewhere: Check all solder points to see if any of them have solder bridges.
High voltage is unstable
- Check all solder points
- Double check that the resistors are correctly placed.
- Incorrect resistor placement will give incorrect output voltage. if the voltage is wildly off, do not attempt to connect the tubes.