Parts List

The Serial and ISP Breadboard Adapter comes in two variants:

8MHz version:

The 8MHz version is programmed to run using the internal 8MHz oscillator of the ATMega328P chip. It comes with the following parts:

• PCB with ISP header as well as LEDs and resistors assembled
• 40-pin male header strip
• ATMega328P with 8MHz bootloader [optional, based on bundle chosen]
• Breadboard [optional, based on bundle chosen]

16MHz version:

The 16MHz version comes with a crystal and two 22pF capacitors. To use it you must connect the crystal between the X1 and X2 ports marked on the PCB

• PCB with ISP header as well as LEDs and resistors assembled
• 40-pin male header strip
• ATMega328P with 16MHz optiboot bootloader [optional, based on bundle chosen]
• Breadboard [optional, based on bundle chosen]
• 16MHz crystal
• 2x 22pF capacitors

Both variants are pre-assembled except for the headers. These must be soldered on before use. See the assembly instructions page for details.

Chose what bundle to get when you buy it in our shop.